لا أستطيع عمل تحديثات للويندوز

السلام عليكم كما هو واضح من العنوان
كلما احازل ان اقوم بعمل تحديثات للويندوز نظهر هذه الرساله :'(

هل نظام التشغيل خاصتك مفعل ؟
بحال كان مفعل طبق هذا الشرح

و قد ارسلت لك نسخة منه على الزوار
+
ارجو منك وضع الصورة بسبولر فهي تشوه شكل الموضوع

المشاركة الأصلية كتبت بواسطة sherlock holmes

هل نظام التشغيل خاصتك مفعل ؟
بحال كان مفعل طبق هذا الشرح
https://support.microsoft.com/en-us/kb/956702

و قد ارسلت لك نسخة منه على الزوار
+
ارجو منك وضع الصورة بسبولر فهي تشوه شكل الموضوع

اخي انا جربت ادخل الامر الموجود في الصفحه اللي بعثتها لي ولكن لم يتم حل المشكله :/

تفضل

حمل هذه الاداة وفقا لنظام تشغيلك

x86-based (32-bit) versions of Windows 7 SP1 and Windows 7 هنا

x64-based (64-bit) versions of Windows 7 SP1 and Windows 7 هنا

x64-based (64-bit) versions of Windows Server 2008 R2 SP1 هنا

Itanium-based versions of Windows Server 2008 R2 SP1 هنا

x86-based (32-bit) versions of Windows Vista SP2 and Windows Vista SP1 هنا

x64-based (64-bit) versions of Windows Vista SP2 and Windows Vista SP1 هنا

x86-based (32-bit) versions of Windows Server 2008 SP2 هنا

x64-based (64-bit) versions of Windows Server 2008 SP2 هنا

Itanium-based versions of Windows Server 2008 SP2 هنا

و اتبع الشرح

• Install and run the tool.
  • Click Download on the Download Center webpage, then do one of the following:
    • To install the tool immediately, click Open or Run, and then follow the instructions on your screen.
    • To install the tool later, click Save, and then download the installation file to your computer. When you're ready to install the tool, double-click the file.
  • In the Windows Update Standalone Installer dialog box, click Yes.
    
    
  • When the tool is being installed, it automatically runs. Although it typically takes less than 15 minutes to run, it might take much longer on some computers. Even if the progress bar seems to stop, the scan is still running, so don't click Cancel.
    
    
  • When you see Installation complete, click Close.
    
    
  • Reinstall the update or service pack you were trying to install previously.

To manually fix corruption errors that the tool detects but can't fixed, see How to fix errors that are found in the CheckSUR.log.
Download the package from Microsoft Update Catalog directly

You can also try to directly download the update package from Microsoft Update Catalog, and then install the update package manually.

For example, you may have problems when you try to install update 3006137 from Windows Update in Windows 7. In this situation, you can download the update package and try to install the update manually. To do this, follow these steps:

• Open Microsoft Update Catalog in Internet Explorer.
  
• In the search box, input the update number that you want to download. In this example, input 3006137. Then, click Search.
  
• Find the update that applies to your operating system appropriately in the search results, and then click Add to add the update to your basket.
  
• Click view basket to open your basket.
  
• Click Download to download the update in your basket.
  
• Click Browse to choose a location for the update you are downloading, and then click Continue.
  
• Click Close after the download process is done. Then, you can find a folder that contains the update package in the location that you specified.
• Open the folder, and then double click the update package to install the update.

المشاركة الأصلية كتبت بواسطة Sherlock Holmes

تفضل

حمل هذه الاداة وفقا لنظام تشغيلك

x86-based (32-bit) versions of Windows 7 SP1 and Windows 7 هنا

x64-based (64-bit) versions of Windows 7 SP1 and Windows 7 هنا

x64-based (64-bit) versions of Windows Server 2008 R2 SP1 هنا

Itanium-based versions of Windows Server 2008 R2 SP1 هنا

x86-based (32-bit) versions of Windows Vista SP2 and Windows Vista SP1 هنا

x64-based (64-bit) versions of Windows Vista SP2 and Windows Vista SP1 هنا

x86-based (32-bit) versions of Windows Server 2008 SP2 هنا

x64-based (64-bit) versions of Windows Server 2008 SP2 هنا

Itanium-based versions of Windows Server 2008 SP2 هنا

و اتبع الشرح

• Install and run the tool.
  • Click Download on the Download Center webpage, then do one of the following:
    • To install the tool immediately, click Open or Run, and then follow the instructions on your screen.
    • To install the tool later, click Save, and then download the installation file to your computer. When you're ready to install the tool, double-click the file.
  • In the Windows Update Standalone Installer dialog box, click Yes.
    
    
  • When the tool is being installed, it automatically runs. Although it typically takes less than 15 minutes to run, it might take much longer on some computers. Even if the progress bar seems to stop, the scan is still running, so don't click Cancel.
    
    
  • When you see Installation complete, click Close.
    
    
  • Reinstall the update or service pack you were trying to install previously.

To manually fix corruption errors that the tool detects but can't fixed, see How to fix errors that are found in the CheckSUR.log.
Download the package from Microsoft Update Catalog directly

You can also try to directly download the update package from Microsoft Update Catalog, and then install the update package manually.

For example, you may have problems when you try to install update 3006137 from Windows Update in Windows 7. In this situation, you can download the update package and try to install the update manually. To do this, follow these steps:

• Open Microsoft Update Catalog in Internet Explorer.
  
• In the search box, input the update number that you want to download. In this example, input 3006137. Then, click Search.
  
• Find the update that applies to your operating system appropriately in the search results, and then click Add to add the update to your basket.
  
• Click view basket to open your basket.
  
• Click Download to download the update in your basket.
  
• Click Browse to choose a location for the update you are downloading, and then click Continue.
  
• Click Close after the download process is done. Then, you can find a folder that contains the update package in the location that you specified.
• Open the folder, and then double click the update package to install the update.

شكراً لك اخي قمت بتنزيل الـsp1 و قدرت احدث الوندز بس عندي سؤال بعد ان قمت بعمل ريستارت لاحظت ان الجهاز ابطأ من الاول والرامات 91% فهم هذا من التحديثات ؟ :/

هالشي له عدة اسباب
احتمال يكون السبب من التحديثات و قد يكون بسبب برامج ثقيلة بعض الشيء

اهاا تمام شكراً ^^
اعتقد ان الموضوع يغلق حالياً
وشكراً لك مره اخرى ^^

السلام عليكم

شلونك اخي الكريم

بازن الله تكون بخير و صحة و سلامة و عافية

حمد لله ان المشكلة قد انتهت

شكرا لك سيد شارلك على الدعم الخورافي

شكرا لك على ثقتك فينا

يغلق و ينقل

لانتهاء المشكلة