.تنبيه . ----- ازاله _ Spyware _ ضخم من نسخ , CS3 و iTunes 7.6 , ----

السلام عليكم







. تنبيه . ----- ازاله _ Spyware _ ضخم من نسخ , CS3 & iTunes 7.6 , ----




عند تثبيت أي شيء "CS3" لكم أيضا الحصول على خدمة اضافية هي التي تديرها تلقائيا عند بدء تشغيل النظام الخاص بك -- أنها اسم :


##Id_String1.6844F930_1628_4223_B5CC_5BB94B879762# # # # # # Id_String1.6844F930_1628_4223_B5CC_5BB94B879762



بالاضافه الى انشاء مجلد فى C:\Program Files باسم Bonjour


يحتوى على ملفان mDNSResponder.exe , mdnsNSP.dll



** تحديث اعتبارا من 09/05/08 فى iTunes 7.6 تثبيت خدمه Bonjour service


الان يمكنك ازاله




1. فتح موجه الأوامر واكتب الأمر التالي :

لفتح موجه الاوامر الدوس

اذهب الى start > run

واكتب cmd ثم اضغط Enter


اكتب الامر التالى .. ثم Enter


كود:
"C:\Program Files\Bonjour\mDNSResponder.exe -remove"
2. انتقل إلى المجلد التالي C:\Program Files\Bonjour


3. اعد تسميه mdnsNSP.dll الى mdnsNSP.old

4. اعد تشغيل الحاسب

5. امسح المجلد Bonjour




الخطوه الاخره


افتح محرر التسجيل


اذهب الى start > run

واكتب regedit ثم Enter


اتبع المسار التالى

اقتباس:

HKEY_LOCAL_MACHINE\SYSTEM\
CurrentControlSet\Services\WinSock2\
Parameters\****Space_Catalog5\
Catalog_Entries

اختر اذهب الى

0000000004 اذا وجد


ثم الناحيه اليمين اختر المفتاح Enabled


اضغط عليه مرتان " Doubleclick " وغير القيمه من 1 الى 0




اعد تشغيل الجهاز




ان لم تتوقف هذه الخدمه .. نفذ الاتى ..


افتح الدوس


وكتب هذه الاوامر


--------------------------------------------------------------------------------------


1.


كود:

net stop "##Id_String1.6844F930_1628_4223_B5CC_5BB94B879762 ##"

2.


كود:
sc config "##Id_String1.6844F930_1628_4223_B5CC_5BB94B879762 ##" start= disabled
or

كود:
sc config "##Id_String1.6844F930_1628_4223_B5CC_5BB94B879762 ##" start= demand





----------------------------------------------------------------------------------------------

او



----------------------------------------------------------------------------------------------------



1.

كود:

net stop "Bonjour Service"
2.

كود:
sc config "Bonjour Service" start= disabled
or
كود:
sc config "Bonjour Service" start= demand


--------------------------------------------------------------------------------------




---- تم الترجمه على قدر المستطاع


توجد تفاصيل الموضوع فى النص الانجليزى


و اكون شاكرا اذا تطوع احدا للترجمه ----







اقتباس:

CS3 & iTunes 7.6+ - Remove The Bloated Spyware!



Whenever you install anything "CS3" you also get an extra service that is automatically run when you start your system - it's ****:



##Id_String1.6844F930_1628_4223_B5CC_5BB94B879762# #



Additionally........a folder is created @ C:\Program Files ****d Bonjour. It's *******s are mDNSResponder.exe and mdnsNSP.dll.

**Update as of 09/05/08 - iTunes 7.6+ installs the Bonjour service - Remove as below!!**





What is Bonjour and why is it installed?

When you install any edition of the Adobe Creative Suite 3 family or a Creative Suite 3 component on Windows, Bonjour is installed as a service on the machine. Bonjour is Apple's open source implementation of zero-configuration networking software. It is used by Adobe Version Cue CS3 client applications to dynamically discover Version Cue Servers on the local network.

For it to function correctly, you must allow Bonjour access to the internet through your firewall. Bonjour checks to see whether the DNS server configured on your computer supports service discovery. No data is transmitted to Adobe. (so they say) Bonjour connects to no other servers than your machine's pre-configured DNS server. (so they say) Bonjour also sends network packets to and receives them from a multicast IP address on the local network (244.0.0.251) once every thirty minutes. This address is reserved for multicast traffic on a local network and such network packets never leave the local network. (so they say)

Identifying the Bonjour service in the Windows Services control panel:

When installed by Creative Suite 3 applications, the **** used by Bonjour in the Services control panel is:

##Id_String2.6844F930_1628_4223_B5CC_5BB94B879762# #





To correct the service's ****, open a command prompt and type the following two commands. Each command needs to be executed individually.... type in the command and hit enter to execute it, then wait till you are back at a prompt ( C:/> ) :




CODE



1. "C:\Program Files\Bonjour\mDNSResponder.exe" -remove

2. "C:\Program Files\Bonjour\mDNSResponder.exe" -install

The service will now be displayed with the correct **** in the Services control panel.


Removing Bonjour (HIGHLY RECOMMENDED!!)




CODE
1. Open a command prompt and type the following command:

"C:\Program Files\Bonjour\mDNSResponder.exe -remove"

2. Navigate to the following folder in Windows Explorer: C:\Program Files\Bonjour

3. Re**** the mdnsNSP.dll file in that folder to mdnsNSP.old

4. Restart your computer

5. Delete the Program Files\Bonjour folder


Disable the Bonjour socket driver:




CODE


1. Open the registry editor and go to:

HKEY_LOCAL_MACHINE\SYSTEM\
CurrentControlSet\Services\WinSock2\
Parameters\****Space_Catalog5\
Catalog_Entries0000000004

Where you'll find the key:

Enabled=REG_DWORD:00000001
Doubleclick on that and change it from 1 to 0.

2. Reboot and the driver will not be loaded any more.







Repair Winsock 2 with the repair utility (LSPFix):



This program attempts to correct Internet connection problems resulting from buggy or improperly removed Layered Service Provider (LSP) software. (ADOBE!!) When you start LSP-Fix, it will read the list of LSP modules from the Windows registry and verify that each module is present. If a module is missing, it is placed on the "Remove" list for removal. When "Finish" is pressed, the undesired entries are removed, and the remaining entries in the registry are renumbered to make them consecutive. The total module counts are then updated. Finally, the program will display a summary of the changes that were made.

Download:
CODE
http://rapidshare.com/files/61693599/LSP_Scara.rar

Note: Removing Bonjour prevents Version Cue clients (Photoshop, Illustrator, InDesign, Flash, Bridge) from automatically discovering Version Cue Servers and Version Cue projects in your local network. You will need to connect manually using Connect to Server and the URL or IP address of the machine running Version Cue Server instead.







-------------------------------------------------------------------------------------------------------




post 14





If you just want it stopped until further notice, you can use the nice GUI of Windows' Services or type the following commands in the command prompt (or in a ******):

CODE
net stop "##Id_String1.6844F930_1628_4223_B5CC_5BB94B87 9762 ##"
sc config "##Id_String1.6844F930_1628_4223_B5CC_5BB94B87 9762 ##" start= disabled
or
sc config "##Id_String1.6844F930_1628_4223_B5CC_5BB94B87 9762 ##" start= demand

Or (if you did the remove/install procedure to get a decent ****):

CODE
net stop "Bonjour Service"
sc config "Bonjour Service" start= disabled
or
sc config "Bonjour Service" start= demand

P.S.
Note there's a space in "start= ". It won't work without it.

--------------------------------------------------------------------------------------------------------



رابط الموضوع الاصلى



http://www.x64bit.net/site/board/ind...=0&#entry52967



..